Spectra DG711 Manuel d'utilisateur Page 23
- Page / 96
- Table des matières
- DEPANNAGE
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
3 Preparation Before Operation
16 DG711 and DG511 Pipe Laser User Guide
Charging Time:
Table 3.2 shows the approximate charging time for 4 to10 batteries with a
7500 mAh capacity.
Recharging the batteries
Note – A sealed Ni-MH battery
pack is offered in most standard
models (P23/P23B).
1 Turn the battery-pack knob
counterclockwise. Lift the battery
pack from the pipe laser.
2 Plug the battery recharger's
single-socket plug into the battery
pack's recharging receptacle.
3 Plug the battery recharger into
an appropriate outlet.
Note – The charger takes 10 hours
to charge the batteries to full
capacity.
Note – To extend battery life, the
charger discharge function should
be performed after every three
months of charging.
C
Warning – Do not charge
the batteries above 45°C
(113°F).
External Power Cable
P21 3.1.2
In case the internal batteries
become discharged and you do not
have spare batteries available, you
can also power the pipe laser using
an optional external power cable.
This can be achieved by using a
DC regulated automotive or
motorcycle battery with the
supplied optional external power
cable on some models. The internal
batteries will not recharge while
you’re using the external power
cable.
Table 3.2 Charging time
# of Cells Cell Capacity Approximate Charging Time
4 7500 mAh 10 Hours with smart charger
4 7500 mAh 14 Hours with 12V Cigarette Lighter
Charger Model P22
- DG711 and DG511 1
- Pipe Laser 1
- Safety Information 6
- Queries 0.0.3 7
- Labels 0.0.4 7
- Warning and 7
- Cautions 0.0.5 7
- Contents 10
- Introduction 1 12
- Claim for Damage 13
- Owner’s Record 1.2 13
- Features and 14
- Functions 14
- Features and Functions 2 16
- Remote Controls 2.2 17
- Model RC502, 7-Button 18
- Remote Control 18
- 11 Grade Bump – If the Grade 19
- Preparation 20
- Operation 20
- 3 Pull on the top housing to 21
- Green LED 22
- Discharge 22
- External Power Cable 23
- P21 3.1.2 23
- 1 Turn the external-power 24
- 3 Insert the plug into the 24
- 4 To disconnect the external 24
- Optional Features 3.2 25
- Getting Started 4 26
- 4 Getting Started 27
- Getting Started 4 28
- Applications 36
- Grade 5.1 37
- Elevation 5.2 37
- Line 5.3 38
- Setup, Step-by 38
- Step 5.4 38
- Set Elevation for Small 39
- In-the-Pipe or Pre-cast 39
- Inverts 5.4.2 39
- Illustration 40
- Elevation of Flat Bottom 41
- Manholes 5.4.3 41
- 1230/1237 Heavy Duty 41
- Invert Plate 5.4.4 41
- 1239 Universal Fixed 42
- 1 Record the “cut-to-invert” 43
- 5 Calculate the TPS setting 43
- Applications and Setups 5 44
- 5 Applications and Setups 45
- 2 Record the “cut-to-invert” 46
- Setting Line 5.4.6 48
- First Point Setup (Using 48
- Plumb-bob) 5.4.7 48
- 1211 Laser Plummet 50
- Line Setting 50
- Second Far-Point 50
- Alignment 50
- Setting Line with the 51
- Line Set/Check Featu 51
- Activating the Cross 51
- Axis Roll Option 5.4.11 51
- Activating Line 52
- Set/Check Raise 52
- Set/Check Lower 5.4.13 53
- Large Pipe 5.4.14 54
- In a Manhole 5.4.15 55
- Open Excavations 5.4.16 58
- Over the Top 5.4.17 59
- DG511/711 62
- Additional 62
- Accessories 62
- 1238/1249 Mounting Plates 6.2 63
- 1244 and 1244-1 63
- T-Bars 6.3 63
- Features 6.3.1 64
- Setup Instructions 6.3.2 66
- Pipe Targets 6.4 67
- Model 936 Adjustable 69
- Pipe Target 6.4.3 69
- Model 956 Optically 70
- Enhanced Universal 70
- Model 1212 LineLevel 6.4.5 70
- 1232 Precast Invert 71
- Adapter 6.4.6 71
- Model 1214 Line String 72
- Refraction 7 74
- 8 When using a blower, make 75
- Model 929 Blower 76
- Operating 76
- Instructions 7.1 76
- 7 Refraction 77
- Troubleshooting 78
- Calibration 9 82
- Point A Point B 83
- Adjusting the 84
- Calibration 9.2 84
- Grade Check 9.3 85
- Example 9.3.1 86
- 9 Calibration 87
- Maintenance 88
- Battery Disposal 10.2 89
- System Cleaning 10.3 89
- Specifications 90
- 11 Laser Specifications 91
- Laser Specifications 11 92
- Request for Service 93
- Survey Instrument Sales 94
- 24037 Acacia 94
- Redford, MI 48239 94
- 313-535-5252 Phone 94
Produits connexes et manuels pour Niveaux laser Spectra DG711
(2 pages)© 2020, manymanuals.fr. Tous droits réservés | 1.463 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels